Cad Symbols Plus

 

PeMillwork Manager

  

PeSymbols
Pulldown Menu


PeSymbols Toolbar

Base Cabinet Module (Dialog Box)

Select from several Base Cabinet variations with this one dialog box. You can choose the AFF Counter Top height, Base Cabinet Style,  Type of View, Adjustable Shelf Mounting preference and Base Cabinet width from 12" to 48" in 1/4" increments (Sink Base Cabinets begin at a width of 24").

Also, with preset insertion points, you can quickly insert your Base Cabinet, hit RETURN, then begin selecting the preferences of your next Base Cabinet.

Base Cabinets are inserted from the bottom left point of your layout working towards the right side.

Wall Cabinet Module ( Dialog Box)

Select from several Wall Cabinet variations with this one dialog box. You can choose either a Standard (Flush Overlay) or Open Wall Cabinet, Recessed or Flush bottom, Adjustable Shelf Mounting preference, and the Type of View desired.

Also, with preset insertion points, you can quickly insert your Wall Cabinet, hit RETURN, then begin selecting the preferences of your next Wall Cabinet.

Wall Cabinets are inserted from the upper left point of your layout working towards the right side.

Counter Top Module ( Dialog Box)

With this dialog box, select section cuts through a wide variety of Counter Top choices. You can choose the Style of Top, with or without Backsplash, and the depth of the Top.

The insertion point is set at the rear left corner of each Counter Top section and is inserted after the Base Cabinet section.

Moulding Profile Module ( Dialog Box) 

Using this dialog box, the user can scroll through the Moulding Library to find the exact profile that is needed. A thumbnail view of each profile is given to assist the user in selecting the desired profile.

There are over 40 Libraries consisting of over 470 profiles located in this module. Libraries such as Bar Rail, Base, Casing, Chair Rail, Crown, Panel Moulds, Wall Cap, Quarter Rounds and much more.

Bonus Blocks Module ( Dialog Box) 

We added this dialog box along with the symbols included in it as a gift to our customers. With this version of our Block Manager, the user is able to create his/her own Libraries, as well as his/her own blocks and have them available right from here.

The Scale and Angle options are very important in getting the blocks positioned correctly before inserting them into an AutoCad drawing.

The Add Library and Add Block buttons are what makes this gift a powerful tool in that it gives the user an edge in working with the PeSymbols Block Manager. The Modify button can be invoked for any block in any library found here. It will open the selected block and allow the user to update and save the block on the fly before inserting it into an AutoCad drawing. All future use of this block will be of the modified version.

As you can see, this module alone makes this Block Manager a powerful and useful tool.

 

  

  

Site Map  |  Feedback  |  Customer Service  |  Paragon Enterprises  |  Email
Copyright 2004 Paragon Enterprises

Autocad, Autocad Symbols, symbols, blocks, Autocad Blocks, Block Library, Block Manager, Library, CAD, CAD Symbols, CAD Blocks, Architectural, Architectural Millwork, Mechanical, Electrical, Piping, Cabinet, Cabinets, Cabinetry, Moulding, Molding, Mouldings, Moldings, Fasteners, Counter Tops, Electrical, Autolisp, Hatch Patterns, Hatch, Millwork